Author: A2Sound
Broadcast Announcer Booth Mult
The Broadcast Announcer Booth Mult is a cable for connecting standard announcer consoles (Daltek, Studio Technologies, ClearCom or similar) to a mult-box or fanout. It features XLR connections for Microphones, Talk Back and IFB. Fanouts are finished with colored “Rock Series” Mesh Covering to help keep cables tangle free & protected.
Protected: How to Use the KP Pick List Tool (Prototype)
There is no excerpt because this is a protected post.
HYDRA Front-Panel Status Diagnostic
Select a front-panel LED, then choose the indication you see. The diagnosis updates automatically. Tap an LED to begin. Flash rates are approximate. Selected indicator PSU Power Supply Status Panel diagnosis Normal condition Show...
Hydra ID Switch Settings
HID Switch Calculator Enter a decimal HID from 0 to 255. The calculator shows the corresponding switch setting from bit 7 through bit 0. Decimal HID value Download SVG Decimal: 39 Binary: 00100111 Active...
How to Connect Dry Pair to XLR: A Practical A2 Guide
Dry pair is old infrastructure, but sometimes it is the only path left between the truck and the field. Here is how I use a known, inactive pair for balanced audio, phantom-powered microphones, RTS...
Camera Intercom Extension with Push-To-Talk
The Camera Intercom Extension with Push-To-Talk is an 8′ intercom 5-pin headset extension cable. The extension cable allows you to move freely while still being on headset. The removable Push-To-Talk button lets you respond...
Married-Pair Cables for Stand Ups
The 50 foot Married-Pair Cable is a two-pair XLR cable for use with stick mics and IFB beltpacks. The Talent-End of the Married-Pair cable is staggered in length. The Microphone cable is 36 inches...